Hey friends! Â I’ve got a soft and colorful wrap bracelet tutorial to share with you today that uses silk fibers and pewter components. Â This boho-chic design adapts to you own favorite colors, and the best part is that if you can braid and tie knots, even a beginner can make this bracelet.
You won’t need any special tools to make this project, and all the supplies came from today’s post sponsor, Happy Mango Beads. Â The links below will take there so that you can shop or learn more about the materials I’m using today!
Here’s what you’ll need:
- 3 – 42″ strands of hand-stitched silk, any color
- 40 – 5mm spacer beads with 2mm hole
- 29mm heart theme pewter connector
- 18mm oval pewter disc bead
- Optional: clipboard, or other means of securing your bracelet wile you work
First, group your three strands of silk together and double them in the middle. Â Tie an overhand knot so that it creates a group of loops on the end with six strands of silk. Â The loops are one side of your bracelet closure, so be sure that the oval button (the other half of your closure) slips comfortably through the loop.
Next, secure the end of your bracelet to a clipboard, pin, or whatever your preference, and separate the six strands into three groups of two each. Â Begin braiding them together, and as you work, slip a pewter bead (or two!) onto the outermost strand. Â I prefer a random, organic look but if you prefer, you can follow a pattern and space the beads at regular intervals.
(Alternately, if you know how to braid a six part braid, you may certainly do that instead!  I am designing for beginners, though, so a three part braid CAN give you a soft, full look when you’re using two strands in each part.)
When you have reached a braided length of 3 – 3.5 inches, slip one of the silk strands through the top side of the heart connector. Â Continue to braid as normal, and when you have braided another inch and your weaving reaches the bottom hole of the connector when laid flat, pass the same color silk strand through the hole from the backside.
Continue braiding, adding beads along the way, until you reach a braided length of approximately 14.5 inches. Â (You can test this length around your wrist before making any knots, wrapping the bracelet twice around your wrist. Â Adjust shorter or longer as necessary.)
Tie an overhand knot at the end of your 14.5 braided inches, and ensure that all strands are secured tightly. Â Trim away four of the strands, leaving just two (and preferably, the longest two for ease of manipulation).
Feed one of the silk cords through the center hole of the flat oval bead. Â Then, through a 5mm spacer bead. Â Finally, pass it back through the center of the flat bead. Â The spacer bead acts as a stopper to hold the flat bead in place. Â Tighten this cord so that the flat bead is as close as it can be to the end of your braid, and using the other silk strand that you reserved, tie a square knot (or a double knot) with these two strands. Â Finally, trim away the excess.
This will leave you with a button-style loop closure, where you will slip the oval disc through the loop to secure it and to take it off.
While I catered to may daughter when I made this bracelet pink and purple, a monochromatic wrap bracelet would probably be even more striking, and I might just have to try it out!
Thanks for joining me for today’s wrap bracelet tutorial, and I hope you all have a great week!
kanchipuram sarees says
nice post
golu dolls chennai says
wow looking good
Kim says
So cute!